F29110C 110" Refrigerated Low Boy Stand S/s Delfield F2110C
|Original Retail Price |$22,627.00
|Availability: In stock|
| FREE SHIPPING |
|Does not include LiftGate Fee or Residential Delivery Fee, if needed.. Only for Customers within the 48 Contiguous States|
|Shipped from |
Mount Pleasant, MI 48804
Model: Delfield F29110C
This item is shipped brand new direct from the manufacturer. Please note the picture above is for reference only.Exterior top is 18-gauge stainless steel with standard marine edges on all four
sides. Corners are fully welded with smooth radii corners for easy clean out.
Interior sub-top is made of 22-gauge 2BF stainless steel and is made integral
with the top by injecting 2.00" of high density polyurethane foam between the
exterior and interior tops.
Delfield 110" Refrigerated Low-Profile Equipment Stand Model F29110C
The Specifications Are As Follows
Refrigerated base interior back and bottom is constructed of 22-gauge 2BF
stainless steel. Exterior sides are constructed of 18-gauge stainless steel.
Bottom and back are made of 22-gauge galvanized steel. Both left and right
interior sides are formed of ABS plastic. The base is injected with 2.00" of
high density polyurethane foam between the exterior and interior. Refrigerated
base fronts are made of .095" thick ABS thermoformed plastic and backed up
by ridged polyurethane water blown injection molded frames. The frames are
an excellent thermo-break and superior structural material for fastening doors
and drawers. Exterior machine compartment side is constructed of 18 gauge
Finished stainless steel ends are standard. Louver, coil panel and drawer
faces are all standard with stainless steel construction. Units are supplied
with wall-mounted bracket and threaded rod to allow installation of the unit
against a solid surface, for employee safety.
Full Extension Plus drawer system is a complete drawer system, which can
operate independent of the unit it's installed in. Drawer system is sized to hold
12 x 20 x 4": deep hotel pans and smaller fractional pans. Drawer system is
all stainless steel construction for maximum durability. Outer drawer track
is made of 11-gauge stainless and held in place with 12-gauge up-right and
cross supports. Drawer track rollers are made of Delrin 100 NC-10 and do
not require grease for operation. Intermediate tracks are removable without
tools and house Delfield's "anti-friction binary roller system". Drawer boxes
are designed with "easy pan grip flanges". Tracks are designed with a stay
shut feature that holds the drawer gasket tight to the base front on uneven
floors. Exterior drawer fronts are made of 22-gauge stainless steel; and an
interior made of ABS plastic with formed in channels to house the snap-in dart
style santoprene gasket. A 12-gauge galvanized brace is foamed in place to
be an integral part of the drawer front assembly. Each drawer front is injected
with 1.87" of high density polyurethane foam between the exterior and interior.
Handles are recessed black plastic and held in with a positive lock system.
Unit is supported with two 14-gauge leg rails that run the entire length of the
unit. Leg rails are welded to the bottom side of the unit and are tied together
with two 12-gauge braces running front to back. Caster/leg boxes are welded
inside the leg rail and 6.12" adjustable stainless steel legs are mounted as
standard with (4) 5/16" bolts.
Self-contained models have a pre-wired condensing unit and a digital thermometer
installed in the machine compartments (standard on right) louver
panel and supplied with an 8' cord and plug. Interior refrigerated base cabinet
will maintain 36 to 40 degree temperatures at 100-degree ambient room temperature.
Refrigeration system components are HFC-404A. Interior cabinet is cooled
with mullion style blower coils (coated) mounted between each door/drawer
section for very even air and temperature control. Electrical connections are
Self-contained models have a pre-wired condensing unit with hot gas condensate
evaporator, a thermometer installed in the removable louver, and is supplied
with an 8.0' (243.8 cm) cord and plug.
One year parts and 90 day labor standard warranty. Backed by the Enodis STAR Service Network, helping to extend the life of your equipment and reduce ownership costs with expert service and genuine factory parts.
|Powered by:||115 volts|
|Shipped from |
Mount Pleasant, MI 48804
|Customer Pick Up|
|Not Available (Shipping Only)|
There are currently no reviews for this item. Be the first to write one.