MON-FRI 8:30A-5:30P SAT 10A-4P EST 404-752-6715 HABLAMOS ESPAÑOL

Commercial 72" Undercounter Freezer 3 Doors 18 Cu.Ft

Ascend |  Model: JUC-72F

Ascend Commercial 72 Undercounter Freezer 3 Doors 18 Cu.Ft - JUC-72F

Not currently offered!

Out Of Stock

Ascend JUC-72F Specifications

This item is BRAND NEW shipped directly from the manufacturer and comes with a warranty of 2 year parts & labor and a five year warranty on the compressor.

18 Cu.Ft Undercounter Freezer 72" Wide"

Actual dimensions of this freezer: 72"W X 29.5"D X 34.8"H

Features & Benefits of this freezer:

  • Three adjustable vinyl coated wire shelves
  • Three doors with reinforced door hinges
  • Front breathing system
  • Heavy duty insulated stainless steel top; great to use as work surface
  • Self-contained rear mounted refrigeration with hot gas condensate; no plumbing or floor drain required
  • Holds -10°-10°F
  • Reinforced door hinges with 90 degree hold open feature; automatic door closure
  • Exterior digital temperature control
  • Forced-air system; most efficient cooling with no need for defrost
  • 2.5" thick, foamed-in-place, CFC-free, polyurethane insulation
  • Snap-in magnetic gasket
  • Evaporative hot gas condensate evaporator-no floor drain required!
  • 5" casters standard for added mobility and ease of cleaning underneath
  • Uses a 1/2 HP compressor that uses R-404A

  • Manufacturer Information


    Power Information

    115 volts


    395 lbs.
    72 in.
    30 in.
    35 in.

    Shipping Information

    Your order will be shipped from
    Sherman, TX 75092
    Hayward, CA 94544
    Bensenville, IL 60106
    Smyrna, GA 30080
    Charlotte, NC 28273

    Customer Pick Up

    (Not Available for pickup)

    NSF Listed
    NSF Approved
    This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
    ETL Listed
    ETL listed
    This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.