Mon-Fri 8:30a-5:30p   Sat 10a-4p EST 404-752-6715 HABLAMOS ESPAÑOL

Atlas Metal Industries WIH-3-D 3 Well Electric Drop In Hot Pan w Individual Drains & Valves

Atlas Metal Industries |  Model: WIH-3-D

Atlas Metal Industries 3 Well Electric Drop In Hot Pan w Individual Drains & Valves - WIH-3-D

Out of stock!

Out Of Stock

Atlas Metal Industries WIH-3-D Specifications

Low Price Guarantee On All Atlas Metal Industries Products!

PLEASE NOTE: This item is Brand New, shipped directly from the manufacturer or supplier and may have a 1-2 week lead time before shipping.

Atlas 3 Well Electric Drop In Hot Pan w Individual Drains & Valves

The WIH series hot pan is an electrically heated drop-in serving unit that provides the convenience of individually controlled hot food wells, designed for standard 12"W X 20"D steam table pans. The pan construction enables the unit to be used either wet or dry and has an individual drain and valve for each compartment.

The entire hot pan is efficiently insulated and provided with a factory applied gasket so that it can be installed in the finest wood fixtures, without marring the counter top. All controls are prewired to a single cord and plug.

This item has many features and benefits including :
  • Individual drain and valve for each well
  • Fully insulated to retain heat - protects fixtures and saves energy.
  • Individual thermostatically controls - the operator can control the temp of each well separately.
  • Factory applied gasket - makes installation a snap and seals units to the counter tio, thus eliminating seepage.
  • Can be used with standard 12"W X 20"D pans, or fractional size pans with the use of adapter bars.
  • NSF certified, UL and CSA recognized

    The spec sheet reads as follows :
    Hot Food Drop-In Well Unit, electric, individual pan design, wet or dry type, three-pan size for 12" x 20" pan, control panel w/individual thermostatic controls, s/s top & wells, galvanized outer liner, with fiberglass insulation

    The pan size of this item is (3) 12"W X 20"D X 6"H. The flange is 24"W X 41 3/4"D.

    This item weighs 152 lbs. but we have added 18 lbs. to the weight for packing and shipping.

  • Manufacturer Information

    Atlas Metal Industries

    Power Information

    208 volts


    152 lbs.
    24 in.
    42 in.
    10 in.

    Shipping Information

    Your order will be shipped from
    Miami, FL 33169

    Customer Pick Up

    (Not Available for pickup)

    NSF Listed
    NSF Approved
    This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
    UL Listed
    UL Listed
    This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
    CSA Certified
    CSA Approved
    This product has been certified by the Canadian Standards Association (CSA) for its use type. Products with more than one power type, such as electric and gas features, will have multiple CSA certifications.

    Included Options

    This item is available in multiple configurations. Get the most from your investment by taking the time to select the right configuration for your needs.

    Voltage - 2 choices
    Please Choose Voltage (In Stock)
    208 V (In Stock)
    220-240 V (In Stock)