MON-FRI 8:30A-5:30P SAT 10A-4P EST 404-752-6715 HABLAMOS ESPAÑOL

12" 1/2 HP Manual Gravity Feed Economy Series Slicer

Berkel |  Model: 827A-PLUS

Berkel 12 1/2 HP Manual Gravity Feed Economy Series Slicer - 827A-PLUS

Sale Price: $1,370.00
In Stock

FREE Shipping

on Vulcan / Berkel

Does not include LiftGate Fee if needed. Only for Customers within the 48 Contiguous States

(Not Available for pickup)

Berkel 827A-PLUS Specifications

Item: Berkel 12" 1/2 HP Manual Gravity Feed Economy Series Slicer



  • 1-speed, 1/2 HP, totally enclosed and permanently lubricated knife motor.
  • Furnished in 115/60/1, 4.0 amp, AC, ETL listed.
  • Finish is stainless steel and sanitary anodized aluminum; unit disassembles quickly without tools for easy cleaning.
  • 45° product table with removable meat pusher.
  • Nominal 12" (300 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife.
  • Carriage handles food up to 10-3/4" (273 mm) wide, by 7-5/8" (194 mm) high or 7-3/8" (187 mm) diameter.
  • Precise slice adjustment to a thickness of 9/16" (14 mm).
  • Top-mounted, two stone knife sharpener produces a consistently sharp knife edge.
  • Permanent, tapered knife ring guard covers non-slicing portion of knife even when the center plate is removed; ring guard design provides more room behind the knife for easy cleaning.
  • Positive, moisture protected, on/off switch with power light indicator.
  • Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle (5-15P).
  • One year limited parts and labor warranty.

Manufacturer Information


Power Information

115 volts


74 lbs.
21.5 in.
24 in.
21.25 in.

Shipping Information

Your order will be shipped from
Ft Mitchell, KY 41017

Customer Pick Up

(Not Available for pickup)

NSF Listed
NSF Approved
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Listed
ETL listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.