Mon-Fri 8:30a-5:30p   Sat 10a-4p EST 404-752-6715 HABLAMOS ESPAÑOL

Krowne Metal KR18-W60A-10 Krowne 1800 Series Underbar Ice Bin w/ 10 Circuit Cold Plate

Krowne Metal |  Model: KR18-W60A-10

Krowne Metal Krowne 1800 Series Underbar Ice Bin w/ 10 Circuit Cold Plate - KR18-W60A-10

5% Off Krowne
Coupon Code: KROWNE5
Sale Price: $2,107.38
In Stock

CALCULATE Freight Delivery

(Not Available for pickup)

  • Bar Equipment » Bar Sinks

  • Krowne Metal KR18-W60A-10 Specifications

    Low Price Guarantee On All Krowne Metal Products!

    This item is brand new and ships directly from the supplier. Please note that this item is made to order, and there may be an extended lead time. The image above is for reference only.

    Item:Krowne Metal 1800 Series Underbar Ice Bin w/ 10 Circuit Cold Plate


  • Drainboard: 20 gauge stainless steel
  • Dump Sink (Blender): 20 gauge stainless steel. 10” x 14” x 7” deep bowl with 1-1/2” drain in center
  • Blender Shelf: 22 gauge stainless steel
  • Interior (Ice Bin): 20 gauge stainless steel
  • Cold Plate: Cast aluminum post mix plate with 10 circuits. Plate is sealed into bottom. Each circuit is 5/16” OD stainless steel tubing. Two full with remainder to be half circuits. Bump and swedge fittings on ends.
  • Front Apron: 20 gauge stainless steel clad over 20 gauge galvanized steel
  • Backsplash: 20 gauge stainless steel
  • Back and Bottom: 20 gauge galvanized steel
  • Legs: 1-5/8” tubular 16 gauge stainless steel with grey plastic bullet foot
  • Tubing Access (Cold Plate): 3/4” x 3-1/2” cutout in left side of backsplash
  • Electrical (Blender): Duplex outlet located underneath Blender Shelf
  • Insulation (Ice Bin): Foamed-in-place polyurethane
  • Plumbing: Hot/Cold Water: 1/2” IPS; Cold Plate: 1/2” IPS drain connection; No Cold Plate: 1” IPS drain connection; Drainboard: 1” IPS drain connection; Dump Sink: 1 1/2” IPS drain connection
  • Faucet: 4” center wall or deck mount faucet with ceramic cartridge valves
  • Low Lead Compliance: Low Lead Compliant faucets meet California AB-1953 and Vermont S152 standards

  • Manufacturer Information

    Krowne Metal
    Krowne Metal


    220 lbs.
    65 in.
    30 in.
    30 in.

    Shipping Information

    Your order will be shipped from
    Wayne, NJ 07470

    Customer Pick Up

    (Not Available for pickup)

    NSF Listed
    NSF Approved
    This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
    Made in the USA
    Made in the USA
    This product was manufactured in the United States of America.