Mfg.: Manitowoc Ice Machines
Model: Manitowoc AR-40000
1 micron particle reduction
For use Manitowoc Ice Machine with 1,001 - 2,500lbs ice per day
Max flow rate: 1.56 gpm
80 grams siliphos, 40 grams per cartridge
Over 60% of ice machine maintenance
calls are water-related! Arctic Pure
water filters are designed exclusively
for ice machine applications and will
reduce these calls.
- Built-in scale inhibitor.
Siliphos is designed into the filters to
reduce scale build-up even under the
hardest water conditions.
- Reduces chlorine taste and odor.
All filtration and scale reduction
material is NSF and/or FDA
compliant and is engineered
to reduce chlorine taste and
odor. Ice looks and tastes better.
-Graded density carbon block filter.
Provides superior dirt holding capacity
and fine sediment reduction.
-Sanitary quick change housing.
Design minimizes contamination of
filter media during filter cartridge
change-out. All filters are provided
with automatic shut-off and
pressure relief valves.
Maximum operating pressure:
25-125 psi (1.7-8.6 bar)
Maximum operating temperature:
AR-10000 ............... 0.75 gpm (2.84 LPM)
AR-20000 ............... 0.75 gpm (2.84 LPM)
AR-40000 ................ 1.5 gpm (5.68 LPM)
Cartridge Housing Material:
Talc Filled Polypropylene
Primary Filter - 1 micron particle reduction. Filter media
is graded density carbon block containing Siliphos scale
inhibitor, which holds dissolved minerals in suspension.
(AR-10000/20 grams siliphos, AR-20000/40 grams siliphos,
AR-40000/80 grams siliphos, 40 grams per cartridge).
Inlet/Outlet fittings - 3/8" John Guess also includes 3/8"
Optional Pre-Filter - An optional pre-filter is
recommended for ice machine installations in areas with high
particulate matter (dirty water). The pre-filter extends the
filtration efficiency and working life of the primary filter
cartridge where this condition exists. The Manitowoc pre-filter
is a cost-efficient solution to the particulate matter (dirty
water) problem because pre-filter replacements are more
economical than a primary filter cartridge.
To insure maximum filtration efficiency, replace the
primary filter cartridge every 6 months. A filter gauge
will indicate if replacement is necessary prior to six
months usage (below 20 psig).
Important notice: Read this performance sheet
and compare the capabilities of this unit with your
actual water treatment needs. It is recommended that
you have your water supply tested to determine your
actual water treatment needs before purchasing a
water treatment unit.
Warning: Do not use with water that is
microbiologically unsafe or of unkown quality without
adequate disinfections before or after the unit.
Caution: The filter must be protected from freezing.
Failure to do so may result in cracking of the filter
housing and water leakage.
Note: Before using the Arctic Pure on non-Manitowoc
machines consult the ice machine manufacturer for
water supply usage requirements.
Warranty: 3-Year parts and labor warranty on head,
shroud, hardware, and mounting assembly (water filter
cartridge not included).
|Shipped from |
Atlanta, GA 30340
|Customer Pick Up|
|Not Available (Shipping Only)|