Please note: local ordinances may require additional accessories to meet fire and safety codes. Check with local code departments before purchasing. Please call us directly with more questions about necessary accessories.
Fire Suppression is only available for new Hoods purchased from ACityDiscount.
This listing is for the ADDITION of a Fire Suppression System for a new 15' Hood. This system is for medium to high heat applications. Standard cooking equipment such as 1-Fryer, Ranges, Griddles, etc are considered medium to high heat.
Superior Hoods uses a highly effective liquid suppressing agent that fights fires three ways:
1. Breaks the Chemical Reaction by interrupting the chemical chain that causes fires to spread intensify. It stops fire cold.
2. Creates Steam and Cools, reducing damage and helps prevent re ignition.
3. Smothers the Fire, when discharged, a chemical chain reaction produces a soapy foam. Oxygen is cut off. The fire goes out. The thick layer of foam reduces the possibilities of re ignition.
Listed by Underwriters Laboratories, Inc., tested to UL 300
Listed by Underwriters Laboratories of Canada, tested to ULC/ORD-1254C.6
Conforms to NFPA standards 17A and 96
New York City MEA approval
DOT rated steel cylinders
This system is for medium to high heat applications. Standard cooking equipment such as 1-Fryer, Ranges, Griddles, etc are considered medium to high heat. Equipment that emits EXCESSIVE heat, flames, smoke, or which produces higher than usual grease vapors would require a custom system. To order, contact our Hood Specialists on 404-752-6715.
Installed Fire Suppression System will require an equipment layout. For maximum 2" Gas Valve which equals roughly 3 million BTU's. This is Pre-Piped but the Installer will need to finish connecting the piping both to the Pull Station AND inside of the exhaust plenum after the hole for the Exhaust Duct is cut.