This is brand new and ships directly from the supplier or manufacturer. 10" wide conveyor belt
Automatic cool-down feature
Energy-saving standby mode
Stainless steel exterior construction
Air-cooled case construction
Single-piece stainless steel crumb tray
Damage resistant calrod heating elements
All models toast bread, buns, and bagels
Convection air dries product faster
Large, easy-to-operate dial controls
Separate upper and lower heat
Settings and conveyor belt speed
High volume (900 slices per hour)
Factory installed NEMA cord and plug
Item: 21" Electric Conveyor Toaster w/ 3" Opening.
Item Number: TC21D366*
Conveyor Toaster, electric, countertop, 21", horizontal conveyor w/angled rack, toasts bread/buns/bagels, stand-by mode, variable speed, approx. 900+ slices/hr cap., s/s constr'n, cool to touch ext'r, 3" opening, front or rear exit, w/cord & NEMA 6-20P plug, 208 or 240 volts
Featuring a 3" loading height to accomodate a variety of product thicknesses.
TC21D3 Series Conveyor Toasters are designed to uniformly toast breads, buns, bagels, and muffins in large quantities, using continuous feed methods.
Extra-Tall 3" (76mm) high opening.
TC21D3 - Conveyor extends to the end of the toasting chamber.
TC21D3 is equipped with a loading rack that is angled to feed the product into the toaster continuously.
TC21D3's are capable of rear-exit pass through operation.
They are shipped as front-return models, but can easily be converted to rear-exit operation, by the following supplied instructions.
Unique air flow design keeps case, top and sides cool.
The unit is equipped with an auto cool down feature which allows the fan to cool the outer skin when the unit is turned off.
Steel construction with a stainless steel finish is used for durability.
A stainless steel full-length, slide out crumb tray for easy clean-up.
A fiberglass return tray is included.
Available in 208V or 240V, 1-phase only.
Total rated input is 2.9KW.
A factory installed 6 foot (1.8m) cord is included.
When control is set to "ON", top and bottom tubular elements will turn on to toast both sides of bread.
Lightness and darkness of the product is achieved by adjusting the top and bottom heat controls.
Standby position allows for energy savings during non-peak periods.
Rotary 3-position dial selects ON/OFF/STANDBY positions.
A conveyor speed dial controls the belt speed.
Heat dials control the upper and lower heating elements.
Warranty includes one year parts and labor, on-site service. (USA only) Call factory for warranty authorization
Customer Pick Up