This is for a BRAND NEW cooler, comes with the manufacturers warranty. T-19G model has19 cubic foot storage space and comes with 3 shelves.
300 series stainless steel front grill, shroud. Anodized quality aluminum
exterior ends and back.
NSF approved, white vinyl coated aluminum and 300 series stainless floor
with coved corners.
Barrel lock standard for each door (excluding T-12G). Locks keyed alike.
Dial exterior mounted temperature monitor.
Cabinet mounted on a welded, galvanized frame rail, painted for additional
corrosion protection. Frame rail fitted with 2 1/2in diameter castors , front
castors include brakes.
Triple pane thermal insulated glass assembly within extruded aluminum
frame, with reinforcing backing plates in each corner. Glass assembly
replaceable without removing the door from hinges.
Lifetime guaranteed adjustable torsion type closure system with aluminum
block supports. The face of each door fitted with a 15in long handle of
same material as door frame.
Entire cabinet structure insulated using foamed-in-place CFC free
Adjustable vinyl coated wire shelves (3 per section). Shelves capable of
supporting up to 250 lbs.
Full height shelf support pilasters, with double oblong holes on 1/2in
centers. Pilasters made of the same material as cabinet interior. Four (4)
chrome plated, stainless steel shelf clips to be included for each shelf.
Fluorescent interior lighting, completely inter-wired to light switch.
Refrigeration system factory balanced using CFC free 134A refrigerant.
Bottom mounted condensing unit - easy access for maintenance.
Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain 33°F to 38°F interior cabinet temperature. (non-adjustable
capillary tube system superior to problematic expansion valve)
Evaporator - epoxy coated at the time of manufacture to eliminate the
potential of corrosion.
Unit completely pre-wired at factory, and ready for final connection to
a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be
A sole use circuit is required.
All True Refrigeration items come with a three (3) year parts & labor warranty, and a five (5) year compressor warranty.
TRUE assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications.
Your order will be shipped from Cleveland, OH 44109
Customer Pick Up
(Not Available for pickup)
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
This product has been certified by the Canadian Standards Association (CSA) for its use type. Products with more than one power type, such as electric and gas features, will have multiple CSA certifications.
Made in the USA
This product was manufactured in the United States of America.