Model: Varimixer W40A
This item is shipped brand new directly from the manufacturer.Mixer frame of heavy-gauge, welded, rolled steel plate. Durable powder coated finish used on those surfaces not constructed of stainless steel. Top cover, splash apron and planetary head cap in heavy-gauge stainless steel. Molded PVC feet pads. bowls in stainless steel. Bayonet shaft in stainless steel. Variable speed V-belt transmission based on precision cast iron pulleys. Springloaded moveable pulleys in the variable speed drive for automatically adjusting of the tension of the special V-belt. The planetary head revolves in heavy-duty ball and needle bearings around the main shaft.
40 Qt. Planetary Mixer Variable Speed 2HP
The Varimixer Model W40A is a planetary mixer with a variable speed drive system. The mixer frame consists of a column with welded-on feet, and a top traverse closed by a stainless steel cover. The bowl is mounted in bowl arms which are manually raised and locked simultaneously or lowered and opened, respectively. The column contains the motor and the bowl arm mechanism. The top traverse contains the transmission system consisting of the moveable pulleys, the intermediate belt drive and the planetary head. Start and stop push buttons are mounted on the frontplate along with a 15-minute electrical timer with a Hold feature. Mixing tools are mounted in a bayonet shaft in the planetary head.
Precision milled beveled gear on the main shaft engages the bayonet shaft and the fixed internal gear ring through a double set of milled gears obtaining extra high torque capabilities of the mixing tools. Precision milled cast iron bowl arms lower and raise the bowl and clamp it in precise position relative to the mixing tool allowing for small tolerance between tool extremities and the bowl. Attachment drive directly coupled to the motor securing maximum power output to the meat grinder or vegetable cutter. The 198 rpm high speed and the powerful motor give the meat grinder an usually high capacity in relation to the size of the mixer.
Powerful 2 hp motor
Overload protection and no voltage release is standard equipment
No bowl adapters required for the downsize bowls
#12 attachment hub with 198 rpm.
Stainless steel bowl
Stainless steel hook
Alloy flat beater
Neoprene feet to minimize walking and rusting, provisions for bolting to the floor
Locking pin on tools instead of shaft
Permanently lubricated planetary head and attachment hub case
15-minute timer with HOLD feature
Variable speed from 60 RPM to 280 RPM
One year parts and labor warranty covered by VARIMIXER
|Powered by:||208/240 volts|
|Shipped from |
Shreveport, LA 71129
|Customer Pick Up|
|Not Available (Shipping Only)|