Mfg.: Comstock Castle
Model: Comstock Castle FHP24-24B
This item is shipped brand new direct from the manufacturer. Please note the picture above is for reference only.CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel finish, welded with angle iron and aluminized inner framing. Sturdy 4" heavy duty stainless pipe legs with adjustable feet. 4" wide stainless steel bull nose landing across the front is a functional work area for service plates and work utensils as well as control protection. Double wall construction with heavy insulation for cooler operation. Installation clearances for noncombustible surfaces are 0" on the sides and 4" in the rear. Char-broilers are approved for use in non-combustible locations only.
This item is made to order and will take up to 2 weeks to ship from date of order. Once ordered, it is non-returnable, non-refundable.
COMSTOCK CASTLE VALUE COUNTER TOP 24" GRIDDLE BROILER CHEESEMELTER
Countertop combination units are made from various components including griddles, open burners, lavarock or radiant char-broilers and in some cases cheesemelter broilers. The exterior bodies and components come in various widths from 24" to 72". The advantage of using a combination unit is the unit can be build to fit a specific kitchen and menu operation and at the same time the user can avoid buying and installing 3 or 4 separate units in favor of one.
GRIDDLE PLATE: Highly polished to minimize food sticking. 3/4" thick plate is standard, 1" thick is available. 4" high splash guard is standard. Higher sides are also available. 21" deep cooking surface with front cold zone grease trough. Grease drain slot is 3.5" x 1" and feeds into a seamless, deep, removable grease drawer.
CHEESEMELTER-BROILER: Cast iron "H" pattern burners rated at 30,000 BTU each featuring an attached stainless steel flame spreader to radiate heat downward combined with insulated aluminized steel side panels for superior heat reflection and fuel efficiency, 12", 18" and 24" models have 1 burner. Adjustable heavy duty, nickel plated, cheesemelter racks measure 18" deep by 6" less than the width of the griddle.
CONTROLS: Equipped with brass gas valves and automatic standing pilots. Pressure regulators are set at the factory for the gas specified. Optimal pressures are 4" WC for natural gas and 10" WC for propane. Manifold size is 3/4" NPT. All controls are tested and confirmed in good working order. Calibration and adjustments are the responsibility of the installer.
|Uses Gas?:||Yes |
|Shipped from |
Quincy, IL 62301
|Customer Pick Up|
|Not Available (Shipping Only)|