Mfg.: Comstock Castle
Model: Comstock Castle FHP24-24
This item is shipped brand new direct from the manufacturer. Please note the picture above is for reference only.GRIDDLE PLATE: Highly polished to minimize food sticking. 3/4" thick plate is standard, 1" thick is available. 4" high splash guard is standard. Higher sides are also available. 21" deep cooking surface
with front, cold zone grease trough. Grease drain slot is 3.5" x 1" and feeds into a seamless, deep, removable grease drawer.
COMSTOCK CASTLE VALUE SERIES 24" COUNTER TOP GRIDDLE MODEL FHP24-24
CONSTRUCTION: Easy cleaning, corrosion resistant stainless steel finish, welded with angle iron and aluminized inner framing. Sturdy 4" heavy duty stainless pipe legs with adjustable feet. 4" wide stainless steel bull nose landing across the front is a functional work area for service plates and work utensils as well as control protection. Double wall construction with heavy insulation for cooler operation. Installation clearances for non-combustible surfaces are 0" on the sides and 0" in the
rear, combustible surfaces are 4" on the sides and 5" in the rear.
CONTROLS: Equipped with brass gas valves and automatic standing pilots. Pressure regulators are set at the factory for the gas specified. Optimal pressures are 4" WC for natural gas and 10" WC for propane. Manifold size is 3/4" NPT. All controls are tested and confirmed in good working order. Calibration and adjustments are the responsibility of the installer.
BURNERS: Long life, 20,000 BTU cast iron "H" pattern burners are evenly spaced, one for each 12" increment, for even heating.
MATCH-UP: FHP Series griddles are designed to match up with FHP char-broilers and hot plates.
|Uses Gas?:||Yes |
|Shipped from |
Quincy, IL 62301
|Customer Pick Up|
|Not Available (Shipping Only)|