This brand new item is shipped directly by manufacturer or supplier. Budget, Deluxe, and Spec-Master® Series feature front & rear with rolled down
edges and sides turned down 90°.
Item: 30"W x 60"L 16ga. S/s Top Work Table w/ Rolled Edges Front & Back.
Item Number: T3060B
Work Table, 30"W x 60"L, 16 ga type 430 s/s top w/rolled edges front & back, sq. turndown ends, 18 ga galv. adjust. undershelf, 1-5/8" O.D. 16 ga galv. legs, adj. high impact plastic bullet feet
Spec-Master® Marine Series feature a marine counter edge on all four sides.
Three grades of steel to choose from.
Wide selection of sizes and styles.
Full range of options and accessories.
Unsurpassed strength and performance.
Heavy gauge polished stainless steel top.
Top reinforced with welded-on hat channel.
Sound-deadened between top and channels.
Budget, Deluxe, and Spec-Master® worktables feature 11/2? (38mm)-diameter
180° rolled edges on front and rear. Ends are turned down 90° providing for flush
installations when required.
Spec-Master® Marine worktables feature a marine counter edge on all four sides.
24" to 36" (610 to 914mm)-wide units that are 96" (2438mm) and longer come with
six legs or more. 48? (1219mm)-wide units that are 72" (1829mm) and longer come with six legs or more.
“Strength by design” patented uni-lok® gusset system is recessed into channel, reducing lateral movement.
Heavy gauge adjustable undershelf with gusset welded to each corner.
All tables prepunched including attachment hardware for installation of drawer assemblies.
Your order will be shipped from
Clayton, DE 19938
Customer Pick Up
(Not Available for pickup)