Everest Refrigeration EBD3-BB 68" Wide Two Section Direct Draw Keg Cooler
27" Depth
Everest Refrigeration Model: EBD3-BB SKU: 270697
Select
at checkout.
| Similar Models Available: |
|---|
 New EBD4-SS |
 New EBD4-CT |
 |
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration EBD3-BB Specifications
The Everest Refrigeration EBD3-BB is a two-section back bar and direct draw keg combo offering 24 cubic feet of total capacity in a 68" wide cabinet. One section holds a half barrel and quarter barrel keg connected to a single-faucet stainless steel draft tower, while the other stores up to 360 twelve-ounce cans or 240 twelve-ounce bottles behind a solid locking door - a practical, self-contained solution for bars and restaurants that want draft service and generous beverage storage without separate units.
Digital controls with an LED display, auto defrost, and LED interior lighting with an on/off switch keep daily operation simple and reliable. Note that a floor drain is required and the drain hose is not included.
Features:
- Back Bar & Direct Draw Keg Refrigerator Combo
- two-section
- 68"W
- 24.0 cu. ft. capacity
- self-contained side mounted refrigeration
- (2) solid hinged doors (locking)
- holds (1) 1/2 barrel & (1) 1/4 barrel keg
- (360) 12 oz. can or (240) 12 oz. bottle capacity
- (2) epoxy coated wire shelves
- (1) 3" diameter insulated stainless steel draft tower (NSF) with air distributor
- single faucet
- stainless steel countertop
- digital controls with LED display
- auto defrost
- LED interior lighting with on/off switch
- textured & laminated black vinyl exterior
- galvanized steel interior wall & stainless steel floor
- exterior drain port for excess top tray moisture
- drain hose not included
- floor drain required
- R290 Hydrocarbon refrigerant
- 1/4 HP
- 115v/60/1-ph
- 3.5 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | EBD3-BB |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 327.00 lbs. |
| Width | 68.00 in. |
| Depth | 27.00 in. |
| Height | 52.38 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Add Extended 3rd Party Warranty