Everest Refrigeration EBD3-BBG-24 68" Wide Two Section Direct Draw Keg Cooler
24.5" Depth
Everest Refrigeration Model: EBD3-BBG-24 SKU: 270694Select
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration EBD3-BBG-24 Specifications
The Everest Refrigeration EBD3-BBG-24 is a two-section back bar and direct draw keg combo that packs a lot of functionality into a 68" wide footprint. The keg section holds one half barrel and one quarter barrel connected to a single-faucet stainless steel draft tower, while the glass door section stores up to 315 twelve-ounce cans or 210 twelve-ounce bottles -a versatile, all-in-one behind-the-bar solution for operations that want both draft service and generous beverage storage without separate units.
Digital controls with an LED display, auto defrost, and LED interior lighting with an on/off switch keep daily operation simple and reliable. Note that a floor drain is required and the drain hose is not included.
Features:
- Back Bar & Direct Draw Keg Refrigerator Combo
- two-section
- 68"W
- 20.0 cu. ft. capacity
- self-contained side mounted refrigeration
- (1) solid hinged & (1) glass hinged door (locking)
- holds (1) 1/2 barrel & (1) 1/4 barrel keg
- (315) 12 oz. can or (210) 12 oz. bottle capacity
- (2) epoxy coated wire shelves
- (1) 3" diameter insulated stainless steel draft tower (NSF) with air distributor
- single faucet
- stainless steel countertop
- digital controls with LED display
- auto defrost
- LED interior lighting with on/off switch
- textured & laminated black vinyl exterior
- galvanized steel interior wall & stainless steel floor
- exterior drain port for excess top tray moisture
- drain hose not included
- floor drain required
- R290 Hydrocarbon refrigerant
- 1/4 HP
- 115v/60/1-ph
- 3.5 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | EBD3-BBG-24 |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 326.00 lbs. |
| Width | 68.00 in. |
| Depth | 24.50 in. |
| Height | 52.38 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.



