Everest Refrigeration EBD4-24 89.25" Wide Three Section Direct Draw Keg Cooler
24" Depth - Holds Four 1/2 Barrel Kegs
Everest Refrigeration Model: EBD4-24 SKU: 270686
Select
at checkout.
| Similar Models Available: |
|---|
 New EBD4-SS |
 New EBD4-CT |
 |
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration EBD4-24 Specifications
The Everest Refrigeration EBD4-24 is a three-section direct draw keg refrigerator built to keep four half barrel kegs cold and four taps flowing through two dual-faucet stainless steel draft towers. At 89-1/4" wide with a stainless steel countertop, it's a substantial, high-capacity draft solution for busy bars and restaurants that need to serve multiple products on tap without interruption.
Digital controls with an LED display, auto defrost, and LED interior lighting keep daily operation simple and reliable. Note that a floor drain is required and the drain hose is not included.
Features:
- Direct Draw Keg Refrigerator
- three-section
- 89-1/4"W
- 28.0 cu. ft. capacity
- self-contained side mounted refrigeration
- (3) solid hinged doors (locking)
- holds (4) 1/2 barrel kegs
- (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor
- (2) faucets per tower
- stainless steel countertop
- digital controls with LED display
- auto defrost
- LED interior lighting
- textured & laminated black vinyl exterior
- galvanized steel interior wall & stainless steel floor
- exterior drain port for excess top tray moisture
- drain hose not included
- floor drain required
- R290 Hydrocarbon refrigerant
- 1/3 HP
- 115v/60/1-ph
- 2.5 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | EBD4-24 |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 440.00 lbs. |
| Width | 89.25 in. |
| Depth | 24.50 in. |
| Height | 52.38 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Add Extended 3rd Party Warranty