Everest Refrigeration ECF1 23.5" Wide Nitro Cold Brew Draft Coffee Dispenser
Holds One 1/2 Barrel Keg
Everest Refrigeration Model: ECF1 SKU: 270630
Select
at checkout.
| Similar Models Available: |
|---|
 New ESF1 |
 New ETF1 |
 |
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration ECF1 Specifications
The Everest Refrigeration ECF1 is a one-section nitro cold brew coffee dispenser that brings a complete, ready-to-serve nitrogen draft system to any cafe, restaurant, or bar setup. At 23-1/2" wide with 8 cubic feet of storage, it holds a half barrel keg and comes fully equipped with a 3" insulated stainless steel draft tower with stout faucet, nitrogen gas tank, dual gauge regulator, and a 5 gallon cornelius keg with ball lock fittings, so there's very little additional equipment needed to get pouring.
Digital controls with an LED display, auto defrost, and LED interior lighting keep the unit running reliably, while a stainless steel countertop and black vinyl exterior give it a clean, polished look behind any counter.
Features:
- Nitro Cold Brew Coffee Dispenser
- one-section
- 23-1/2"W
- 8.0 cu. ft. capacity
- self-contained rear mounted refrigeration
- (1) solid hinged door (locking)
- holds (1) 1/2 barrel keg
- (1) 3" diameter insulated stainless steel draft tower with single stout faucet
- (1) 2 way air distributor
- (1) 22 cu. ft. aluminum nitrogen gas tank
- (1) dual gauge nitrogen regulator with shutoff valve
- (1) 5 gallon cornelius keg
- matching ball lock fittings
- digital controls with LED display
- auto defrost
- LED interior lighting
- stainless steel countertop and rail
- textured & laminated black vinyl exterior
- galvanized steel interior walls & stainless steel floor
- R290 Hydrocarbon refrigerant
- 1/5 HP
- 115v/60/1-ph
- 2.5 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | ECF1 |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 177.00 lbs. |
| Width | 23.50 in. |
| Depth | 32.00 in. |
| Height | 54.63 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Add Extended 3rd Party Warranty