Everest Refrigeration EGC65 65" Wide Slide-Top Glass & Plate Chiller
21 Cubic Foot Capacity - Holds 290 8" Mugs
Everest Refrigeration Model: EGC65 SKU: 270621
Select
at checkout.
 |
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration EGC65 Specifications
The Everest Refrigeration EGC65 is a full-size glass and plate chiller designed to keep mugs, glasses, and plates frost-cold and ready for service. With a 64-5/8" wide stainless steel countertop, capacity for up to 290 eight-inch mugs, and two sliding stainless steel lids with ratchet locks, it's a practical, high-capacity chilling solution for bars, restaurants, and high-volume beverage service operations.
Digital controls with an LED display, a defrost cycle with heater, and LED interior lighting keep the unit running reliably and contents easy to access throughout a busy service — a hardworking addition to any bar or service counter setup.
Features:
- Solid Slide Lid Glass & Plate Chiller
- 64-5/8"W
- 21.0 cu. ft. capacity
- self-contained bottom mounted refrigeration
- (290) 8" mug capacity
- (2) stainless steel sliding lids with ratchet lock
- (7) epoxy coated wire shelves
- stainless steel countertop & rails
- digital controls with LED display
- defrost cycle with heater
- LED interior lighting with on/off switch
- textured & laminated black vinyl exterior
- galvanized steel interior
- R290 Hydrocarbon refrigerant
- 1/2 HP
- 115v/60/1-ph
- 5.0 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | EGC65 |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 314.00 lbs. |
| Width | 64.63 in. |
| Depth | 26.75 in. |
| Height | 33.75 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Add Extended 3rd Party Warranty