Please note the picture above is for reference only
For over 60 years, McCall Refrigeration has supplied commercial refrigeration equipment to all sectors of the foodservice industry including independent and chain restaurants, schools and universities, supermarkets and correctional and healthcare facilities. Through the years, McCall has consistently utilized quality materials and manufacturing processes to ensure the finest finished product. McCall cuts no corners when it comes to design and performance elements. McCall products are built with innovative design elements that focus on food safety and efficiency.
McCall's sandwich salad prep tables make it easy to incorporate new menu items to meet customer demands and changing food trends. The full line offers 27in, 45in and 59in models with various pan configurations to accommodate the prep needs of most any kitchen. And installation requires no plumbing or floor drains. This sandwich prep table has the following features and specifications:
Stainless steel top, front, door(s) and exterior ends. All metal, welded construction. All joints and seams closed and sealed. Enclosed rear with removable machine compartment panel, Zinc coated steel exterior bottom and rear with coved, sanitary aluminum interior (S/S interior available if specified.). Salad and sandwich unit model tops are provided with foamed-in-place, high impact non-conducting thermobarrier, raised edge breaker frame. Opening fitted with 1/6 size 4in deep high-impact plastic salad pans. Openings will accommodate 6in deep inserts (not provided). The unit is supported by 6in minimum height adjustable legs with non-marring feet.
Self-closing with full face S/S exterior and aluminum inner pan standard. Door insulated with one-shot, polyurethane and one piece vinyl, self-adjusting magnetic gasket keyed into a thermal-breaker
retainer frame. Gaskets are removable without tools for cleaning. All door openings have full perimeter minimum-wattage anti-condensate heaters behind the S/S facia to retard condensation. One piece door pull with concealed selfclosing hinge mechanism, safety stops and stay open feature. Doors on the single section models are reversible and can be quickly rehinged without special tools (with additional hardware). These
are shipped from factory hinged on the right, facing cabinet.
Entire cabinet and door insulated with special, extra rigid one-shot, high pressure,
foamed-in-place, closed cell polyurethane, average thickness 2in. Interior Shelves - Two heav y - d u t y, adjustable, removable epoxy coated shelves are furnished for each door section.
The system is a forced-air, automatic defrost, hermetic design with
R-22 refrigeration, capillary-metering device, and automatic, adjustable thermostat. It is self-contained
with air-cooled, condensing unit and a high-efficiency, space-saver diffuser with high humidity, fin coil for extra long life. All models are complete with a removable, energy free automatic condensate evaporator. No floor drain or plumbing connections required.
One-shot high-pressure, foamed-in-place Polyurethane insulation
Matched coil and compressor
Energy-free automatic condensate evaporator
No need for plumbing or floor drains
Heavy-duty stainless steel tops, fronts, doors and exterior ends
6in adjustable legs or casters
Full access, combination stainless steel telescoping box cover and utility shelf
(8) 1/6, 4in deep salad/condiment pans
12in, full-width removable/reversible synthetic cutting board