Low Price Guarantee On All American Panel Products!
This item is Brand New and ships direct from the manufacturer.
Item: HurriChill™ Reach in Seven Pan Capacity Blast Chiller/Shock Freezer
Model #: AP7BCF70-2
This compact unit has a self-contained, aircooled refrigeration system and is complete with all required controls and accessories.
The microprocessor control system provides a choice of operating cycles: soft chilling, hard chilling, shock freezing, holding, and sterilizing. A heated core temperature probe is provided for accurate control of temperature within the product. This model is provided with one stainless steel wire shelf per level, sized to accommodate any size pan up to a maximum of 18" x 26" (pans not included). The capacity of this freezer is 7 levels.
Blast chilling (soft or hard) lowers the food core temperature from 160°F to 38°F in less than 2 hours. Shock freezing lowers the food core temperature from 160°F to 0°F within 4 hours. Chilling and freezing times will vary somewhat, depending on the food quantity, initial temperature, density, moisture content, specific heat, and type of container. The airflow has a high velocity, indirect pattern designed to cool all levels at identical rates. Time/temperature chilling and freezing rates meet or exceed all FDA and state regulations.
The chilling/freezing cabinet is constructed of polished
type 304 stainless steel, with 2" of CFC-free, high density polyurethane
insulation. The interior panels have a mirror finish and interior bottom
corners are fully rounded. The door is equipped with a removable
magnetic gasket. The door is hinged on operator’s left. All motors are
sealed ball bearing wash-down type.
The self-contained refrigeration system includes a condensing unit using R-404A refrigerant. The evaporator temperature range is +25°F to -40°F. The compressor is a hermetic type with inherent overload protection.
MICROPROCESSOR CONTROL SYSTEM:
The solid state electronic control panel is user friendly, easy to reach, and can be set for automatic or manual operation. The heated core probe continuously measures the
product temperature during the chilling or freezing cycles. At the end of
freezing cycle the probe can be heated for ease of removal from the
frozen product. Easy to read VFD display and buzzer alarm are standard
features. All settings are programmable by the operator.