CMA Dishmachines L-1X W/ HTR Undercounter Low Temperature Dishwasher w/ Sustainer Heater
12" Door Opening, 30 Rack/Hr. More CMA Products Products
CMA Dishmachines Model: L-1X W/ HTR SKU: 149944
Free Shipping
5,592.60$5,592.60
Or payments as low as $555/month.
Select
at checkout.
Select
at checkout.
In Stock
Pickup Not Available
 |
Earn More With PeachPoints
|
Free Shippingon CMA Dishmachines products |
|
|
Only for customers within the 48 contiguous states..
| |
CMA Dishmachines L-1X W/ HTR Specifications
Low Price Guarantee On All CMA Dishmachines Products!
Low Temperature Chemical Sanitizing Undercounter Dishwasher w/ Sustainer Heater
This CMA low temperature undercounter chemical sanitizing commerical dishwasher meets NSF, UL and CUL sanitation and construction standards WITHOUT the use of BOOSTER or TANK HEATERS. The model L-1X is constructed entirely of 304 stainless steel. Each unit automatically washes, rinses, and sanitizes food service utensils in standard 20" x 20" racks. Unit comes standard with upper and lower stainless steel wash arms. PLEASE NOTE: THIS IS A LOW TEMP MACHINE AND COMES WITH A SUSTAINER HEATER, NOT A BOOSTER HEATER.
Features:
Washes 30 racks / 120 covers per hour
12-1/8" Door opening
Economical to operate - uses only 1.7 gallons of water per cycle
All heavy duty 304 stainless steel construction assures long life and years of trouble free operation
Unique spray arm system features upper & lower stainless steel wash arms with reinforced end caps
Built-in chemical pumps and deliming system assures proper chemical usage
Convenient to service "Works-in-a-drawer" - all electrical components are attached to a sliding drawer for easy access and service (please see picture)
Pumped drain allows for flexible installation - requires no floor drain
Pump purging system improves results by eliminating soil and chemical carryover during rinse cycle
Operating Cycle
Wash time: 57 sec
Rinse time: 48 sec
Dwell / Purge time: 15 sec
Total cycle time: 120 sec
Wash tank capacity: 1.7 gal
Wash pump capacity: 35 GPM
Operating Temperature: 120°F required / 140°F recommended
Water Consumption
Per rack: 1.7 gal
Per hour: 40.8 GPH
Water inlet: 1/2"
Drain: 1"
Wash pump motors: 1 HP
Dimensions: 26" D x 24" W x 30" H
Dishrack dimensions: 19-3/4" x 19-3/4"
Electical: 115 volts / 16 Amps
This CMA low temperature undercounter chemical sanitizing commerical dishwasher meets NSF, UL and CUL sanitation and construction standards WITHOUT the use of BOOSTER or TANK HEATERS. The model L-1X is constructed entirely of 304 stainless steel. Each unit automatically washes, rinses, and sanitizes food service utensils in standard 20" x 20" racks. Unit comes standard with upper and lower stainless steel wash arms. PLEASE NOTE: THIS IS A LOW TEMP MACHINE AND COMES WITH A SUSTAINER HEATER, NOT A BOOSTER HEATER.
Features:
Operating Cycle
Wash time: 57 sec
Rinse time: 48 sec
Dwell / Purge time: 15 sec
Total cycle time: 120 sec
Wash tank capacity: 1.7 gal
Wash pump capacity: 35 GPM
Operating Temperature: 120°F required / 140°F recommended
Water Consumption
Per rack: 1.7 gal
Per hour: 40.8 GPH
Water inlet: 1/2"
Drain: 1"
Wash pump motors: 1 HP
Dimensions: 26" D x 24" W x 30" H
Dishrack dimensions: 19-3/4" x 19-3/4"
Electical: 115 volts / 16 Amps
Dishwasher is shipped new in its original packaging & comes complete with the manufacturer's warranty.
Manufacturer Information | |
| Brand | CMA Dishmachines |
|---|---|
| Model | L-1X W/ HTR |
Power Information | |
| Power | 120 volts |
| Phases | 1 |
| Watts | 1850 |
Item Dimensions | |
| Weight | 196.00 lbs. |
| Width | 24.00 in. |
| Depth | 24.00 in. |
| Height | 35.00 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
UL Listed
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
Made in the USA
This product was manufactured in the United States of America.
Add Extended 3rd Party Warranty