ACityDiscount - Restaurant Equipment and Restaurant Supply
ACityDiscount - Restaurant Equipment and Restaurant Supply

Pre-Owned Captive-Aire Systems, Inc. 4530-ND 6.5Ft Grease Exhaust Hood Package

Captive-Aire Systems, Inc. Model: 4530-ND SKU: 131112
Pre-Owned Captive-Aire Systems, Inc. 4530-ND 6.5Ft Grease Exhaust Hood Package
Out Of Stock Out of Stock!
  • NSF Listed
  • ETL Listed

Call For Info
404-752-6715

Captive-Aire Systems, Inc. 4530-ND Specifications

This Commercial Kitchen 6.5Ft Grease Exhaust Hood Package is designed to be used in any commercial kitchen. The ND Series is a Type I, Wall Canopy Hood for use over 450°F, 600°F, and 700°F cooking surface temperatures. The Type I Hood is used over cooking equipment to remove heat, smoke and grease-laden effluent.
This package includes the following components
HOOD
  • Grease Extraction: This hood come standard with stainless steel baffle filters and a deep grease trough which allows for easy cleaning.
  • Construction: Polished stainless steel on the interior and exterior of the front enhance aesthetics. Fully welded and polished front corners. Fabricated from Type 430 stainless steel.
  • ETL Listed: ETL Listed for use over 450°F, 600°F and 700°F cooking surface temperatures, which provides flexibility in designing kitchen ventilation systems. ETL Listed to US and Canadian safety standards, ETL Sanitation Listed and built in accordance with NFPA 96.
  • Attractive and easy to clean stainless steel construction
  • Overall hood measurements 78 5/8"W x 61¾"D x 32 7/8"H
  • Interior measurements of 66"W x 44"D x 29½"H
  • Filter screen compartment with (3) filter screens
  • Return air attachment
  • Light fixtures with globes(bulbs not included)
  • Top vent 15¾" x 9 3/8"
  • Lower vent 13" x 10"
  • CFM 150-250

    EXHAUST FAN
  • CaptiveAire Systems - #NCA14FA
  • Belt Drive Centrifugal Upblast Exhaust Fan with 15.75" wheel
  • 208v/3phase,60hz,1730rpm,1/2HP motor

    MAKE-UP AIR FAN
  • Standard Rooftop Filtered CaptiveAire Systems - #NSAU1-G10
  • Supply Unit with 10" Blower in Size #1 Housing
  • Includes Intake Hood with EZ Filters,
  • 208v/3phase,60hz,1730rpm,1/2HP motor

    PYRO CHEM model # NMCHC fire supression control head with tubing

    (2) Curb assembly ducts (1) measures 23"square x 20"H (1) measures 23"square x 14"H
    • HOOD Model #4530ND
    This item is in New condition and has never been used or connected and installed. There are some minor dents and scratches from handling. The mounting hardware and fire suppression tank are not included. This unit will need to be connected to a power source by a licensed professional. This hood package is part of a kitchen ventilation system. Additional components may be required for this item to function as designed.
    Attention CA Residents
    Captive-Aire

    Manufacturer Information

    Brand Captive-Aire Systems, Inc.
    Model 4530-ND

    Power Information

    Power 120/208 volts
    Phases 1/3

    Item Dimensions

    Weight 700.00 lbs.
    Width 79.00 in.
    Depth 62.00 in.
    Height 33.00 in.

    Packing Info

    Packing Fee $180.00
    NSF Listed

    NSF Listed

    This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.

    ETL Listed

    ETL Listed

    This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.