Everest Refrigeration EBD4-CT 89.25" Wide Three Section Direct Draw Keg Cooler
With Club Top Compartment - Holds Four 1/2 Barrel Kegs
Everest Refrigeration Model: EBD4-CT SKU: 270682
Select
at checkout.
 |
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration EBD4-CT Specifications
The Everest Refrigeration EBD4-CT is a three-section club top direct draw keg refrigerator holding up to four half barrel kegs and serving four taps through two dual-faucet stainless steel draft towers. The addition of a sliding club top lid adds a refrigerated storage compartment on top — a useful bonus for keeping garnishes, bottles, or bar essentials cold and within easy reach during a busy service.
Digital controls with an LED display, auto defrost, and LED interior lighting keep the unit running reliably throughout the day. Note that a floor drain is required and the drain hose is not included.
Features:
- Club Top Direct Draw Keg Refrigerator
- three-section
- 89-1/4"W
- 32.0 cu. ft. capacity
- self-contained side mounted refrigeration
- (3) solid hinged doors (locking)
- holds (4) 1/2 barrel kegs
- (1) sliding club top lid
- (1) epoxy coated wire shelf
- (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor
- (2) faucets per tower
- stainless steel countertop & lid
- digital controls with LED display
- auto defrost
- LED interior lighting
- textured & laminated black vinyl exterior
- galvanized steel interior wall & stainless steel floor
- exterior drain port for excess top tray moisture
- drain hose not included
- floor drain required
- R290 Hydrocarbon refrigerant
- 1/3 HP
- 115v/60/1-ph
- 2.5 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | EBD4-CT |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 450.00 lbs. |
| Width | 89.25 in. |
| Depth | 27.00 in. |
| Height | 52.38 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Add Extended 3rd Party Warranty