Everest Refrigeration EBD4-SS 89.25" Wide Two Section Direct Draw Keg Cooler
Holds Four 1/2 Barrel Kegs
Everest Refrigeration Model: EBD4-SS SKU: 270671
Select
at checkout.
| Similar Models Available: |
|---|
 New EBD4-CT |
 |
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Everest Refrigeration EBD4-SS Specifications
The Everest Refrigeration EBD4-SS is a three-section direct draw keg refrigerator built for serious draft beer operations, holding up to four half barrel kegs behind three solid locking doors in a 89-1/4" wide stainless steel cabinet. Two stainless steel draft towers with two faucets each put four taps within easy reach, making it a powerful, high-volume draft solution for busy bars and restaurants that need to serve multiple products simultaneously.
Digital controls with an LED display, auto defrost, and an overheat protection alarm for the compressor and condenser coil keep the unit running reliably throughout a busy service. Note that a floor drain is required and the drain hose is not included.
Features:
- Direct Direct Draw Keg Refrigerator
- three-section
- 89-1/4"W
- 32.0 cu. ft. capacity
- (3) solid hinged doors (locking)
- snap-in magnetic door gasket
- holds (4) 1/2 barrel kegs
- (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor
- (2) faucets per tower
- digital controls with LED display
- +33°F to +54°F temperature range
- auto defrost
- LED interior lighting
- overheat protection alarm for compressor & condenser coil
- stainless exterior
- galvanized steel interior
- self-contained side mounted refrigeration
- exterior drain port for excess top tray moisture
- drain hose not included
- floor drain required
- R290 Hydrocarbon refrigerant
- 1,907 BTU/hr
- 1/3 HP
- 115v/60/1-ph
- 2.5 amps
- cord
- NEMA 5-15P
- NSF
- cETLus
- ETL-Sanitation
Warranty:
- 3 year parts & labor warranty
- 10 year compressor warranty
Manufacturer Information | |
| Brand | Everest Refrigeration |
|---|---|
| Model | EBD4-SS |
Power Information | |
| Power | 115 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 455.00 lbs. |
| Width | 89.25 in. |
| Depth | 27.00 in. |
| Height | 52.38 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Add Extended 3rd Party Warranty