Krowne Metal KR24-W60A-10 Krowne 1800 Series Underbar Ice Bin w/ 10 Circuit Cold Plate
Krowne Metal Model: KR24-W60A-10 SKU: 139347
Sale Price
$5,237.10/ each
In Stock
Pickup Not Available
| Similar Models Available: |
|---|
 New KR24-W60B-10 |
 New KR24-W60C-10 |
 New KR24-W60D-10 |
 New KR24-W60E-10 |
 New KR24-W66A-10 |
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states.. | |
Krowne Metal KR24-W60A-10 Specifications
Low Price Guarantee On All Krowne Metal Products!
This item is brand new and ships directly from the supplier. Please note that this item is made to order, and there may be an extended lead time. The image above is for reference only.
Item: 1800 Series Underbar Ice Bin w/ 10 Circuit Cold Plate
Model:KR18-W60A-10
Features
Drainboard: 20 gauge stainless steel
Dump Sink (Blender): 20 gauge stainless steel. 10” x 14” x 7” deep bowl with 1-1/2” drain in center
Blender Shelf: 22 gauge stainless steel
Interior (Ice Bin): 20 gauge stainless steel
Cold Plate: Cast aluminum post mix plate with 10 circuits. Plate is sealed into bottom. Each circuit is 5/16” OD stainless steel tubing. Two full with remainder to be half circuits. Bump and swedge fittings on ends.
Front Apron: 20 gauge stainless steel clad over 20 gauge galvanized steel
Backsplash: 20 gauge stainless steel
Back and Bottom: 20 gauge galvanized steel
Legs: 1-5/8” tubular 16 gauge stainless steel with grey plastic bullet foot
Tubing Access (Cold Plate): 3/4” x 3-1/2” cutout in left side of backsplash
Electrical (Blender): Duplex outlet located underneath Blender Shelf
Insulation (Ice Bin): Foamed-in-place polyurethane
Plumbing: Hot/Cold Water: 1/2” IPS; Cold Plate: 1/2” IPS drain connection; No Cold Plate: 1” IPS drain connection; Drainboard: 1” IPS drain connection; Dump Sink: 1 1/2” IPS drain connection
Faucet: 4” center wall or deck mount faucet with ceramic cartridge valves
Low Lead Compliance: Low Lead Compliant faucets meet California AB-1953 and Vermont S152 standards
Attention CA Residents
Item: 1800 Series Underbar Ice Bin w/ 10 Circuit Cold Plate
Model:KR18-W60A-10
Features
***Please note that this item is built to order and may not be able to be cancelled.
Manufacturer Information | |
| Brand | Krowne Metal |
|---|---|
| Model | KR24-W60A-10 |
| Model | KR18-W60A-10 |
Item Dimensions | |
| Weight | 220.00 lbs. |
| Width | 65.00 in. |
| Depth | 30.00 in. |
| Height | 30.00 in. |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
Made in the USA
This product was manufactured in the United States of America.
