Please note: local ordinances may require additional accessories to meet fire and safety codes. Check with local code departments before purchasing. Please call us directly with more questions about necessary accessories.
This listing is for an exhaust hood. This is NOT the entire Hood System that you would need. Please note there is no pre-cut hole for ventilation. Please note there is no pre-cut hole for ventilation. This is only for the major components that apply to NFPA 96 Codes. Please check with your local code department for specifics.
The Supply Air design is better than the competition in that the supply air is distributed directly into the hood through a perforated, aluminum screen. It is more efficient in that a minimal amount of conditioned air is exhausted through the hood and more of it stays in the building .
Shallow Front Design
Features a shallow front design (standard 16" tall in the front, but can be as short as 12" for an additional charge) so that they can be used where low ceilings (8 foot) are present. These hoods function where standard Box Hoods would not work. The hood still drops down closer to the cooking surfaces in the back. This allows even more of the fumes, smoke, and grease-laden vapors to be pulled out of the building.
Larger, 20-inch high Filters
The filters in the hood are 20-inches high as opposed to the typical 16-inch high. This provides more filtering surface and therefore is more efficient and quieter to operate.
This hood is 15ft wide, 4ft deep, and 2ft tall at the back. Best for most wall mount commercial hood applications. For use in medium to heavy cooking environments. The grease cup and aluminum filters are included and other accessories are available (please see Recommended Accessories just below). Per the manufacturer's specifications, this hood would require 5000 CFM (at 5/8 Static Pressure) if at least one side is against a wall.
Please note that these are manufactured to order. They are usually packaged and shipped out within 5 to 10 Business days. Delivery times vary depending on your location. Thank you for your understanding and patience
This hood is brand new, shipped directly from the manufacturer. The above picture is representative of the style of hood and is from the same manufacturer. If you are in need of an exhaust or nake-up air fan to accompany this hood, lights, or other accessories like extra filters, please check the Recommended Accessories.
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
This product has been certified by the National Fire Protection Association (NFPA) as meeting standards for fire safety including electrical integrity, heat resistance, fire and explosion hazards, seal integrity and more.
Made in the USA
This product was manufactured in the United States of America.