Toastmaster TC21D-240 Commercial Conveyor Toaster 900 Slices/Hr 240v

Item: 21" Electric Conveyor Toaster w/ 3" Opening.

Item Number: TC21D-240

Description:

Conveyor Toaster, electric, countertop, 21", horizontal conveyor w/angled rack, toasts bread/buns/bagels, stand-by mode, variable speed, approx. 900+ slices/hr cap., s/s constr'n, cool to touch ext'r, 3" opening, front or rear exit, w/cord & NEMA 6-20P plug, 240 volts

Standard Features:

10" wide conveyor belt

Automatic cool-down feature

Energy-saving standby mode

Stainless steel exterior construction

Air-cooled case construction

Single-piece stainless steel crumb tray

Damage resistant calrod heating elements

All models toast bread, buns, and bagels

Convection air dries product faster

Large, easy-to-operate dial controls

Separate upper and lower heat

Settings and conveyor belt speed

High volume (900 slices per hour)

Factory installed NEMA cord and plug

Featuring a 3" loading height to accommodate a variety of product thicknesses.

Application:
TC21D3 Series Conveyor Toasters are designed to uniformly toast breads, buns, bagels, and muffins in large quantities, using continuous feed methods.

General Information:

Product Height:

Extra-Tall 3" (76mm) high opening.

Conveyor Type:

TC21D3 - Conveyor extends to the end of the toasting chamber.

Product Loading:

TC21D3 is equipped with a loading rack that is angled to feed the product into the toaster continuously.

Product Delivery:

TC21D3's are capable of rear-exit pass through operation.

They are shipped as front-return models, but can easily be converted to rear-exit operation, by the following supplied instructions.

Safety:

Unique air flow design keeps case, top and sides cool.

The unit is equipped with an auto cool down feature which allows the fan to cool the outer skin when the unit is turned off.

Construction:

Steel construction with a stainless steel finish is used for durability.

A stainless steel full-length, slide out crumb tray for easy clean-up.

A fiberglass return tray is included.

Electrical:

Total rated input is 2.9KW.

A factory installed 6 foot (1.8m) cord is included.

Heating:

When control is set to "ON", top and bottom tubular elements will turn on to toast both sides of bread.

Lightness and darkness of the product is achieved by adjusting the top and bottom heat controls.

Standby position allows for energy savings during non-peak periods.

Controls:

Rotary 3-position dial selects ON/OFF/STANDBY positions.

A conveyor speed dial controls the belt speed.

Heat dials control the upper and lower heating elements.

Warranty:
Warranty includes one year parts and labor, on-site service. (USA only) Call factory for warranty authorization