MON-FRI 8:30A-5:30P SAT 10A-4P EST 404-752-6715 HABLAMOS ESPAÑOL

18" Bowl Cutter w Built in #12 PTO Hub

Univex |  Model: BC18

Univex 18 Bowl Cutter w Built in #12 PTO Hub - BC18

Sale Price: $5,495.00
In Stock

FREE Shipping

On Univex

Does not include LiftGate Fee if needed. Only for Customers within the 48 Contiguous States

(Not Available for pickup)

Univex BC18 Specifications

This unit is shipped brand new complete with warranty

Item: Univex 18" Bowl Cutter with Built in #12 PTO Hub
Model: BC18

This all-in-one workstation is designed for volume production of numerous food preparation tasks. The bowl cutter uses cutlery grade, twin stainless steel knives that make 3,768 cuts per minute. Cut products that vary from parsley and root vegetables to meats, cheeses and breads as coarse or fine as you like! The stainless steel bowl revolves at 22 rpm, so the longer the product stays in, the finer the cut. Unlike traditional food processors, the BC18 allows for continuous operation; no need to stop unit to empty the bowl! This workhorse of a unit also features a built-in #12 PTO hub. Attach optional equipment such as the VS9 Vegetable cutter and slice away or attached the VS9H shredder and grater unit to make coleslaw or grate cheese. Also available is the ALMFC12 meat and food chopper, which you can use to grind hamburger, pork or make sausages. These items are available from your Univex Authorized Dealer. Safety features include sensors that prevent the unit from running without the bowl and cover in place and no voltage release protection; the unit won’t accidentally turn on after power failure. The BC18 also features a removable, dishwasher safe cutting board that is reversible. NSF approved and UL listed. This unit has the following features and specifications:

  • Electrical: 115v, 60 Hz. single phase.
  • Motor: 1 HP capacitor ctart
  • Drive: Knife shaft, ball bearing mounted, driven by a ribbed poly "V" belt.
  • Knife Blade: Cutlery grade twin stainless steel knives making 3,768 cuts per minute.
  • Bowl: 18" (457mm) diameter, polished, die drawn, 304 stainless steel. Driven at 22 rpm.
  • Housing & Bowl Cover: Cast aluminum. Polished and anodized.
  • Switch: Momentary contact stop & start push button. Two pole contactor provides no voltage release protection. Pilot light and protective boot.
  • PTO Hub: Industry standard #12 Power Take-Off hub running at 269 rpm.
  • Cutting Board: 10 ½" x 9 ½". Removable, reversible and dishwasher safe.
  • Cord & Plug: 3-wire, 16-gauge, 5 ft long SJT cord with 3 prong (NEMA 5-15P) molded plug.


  • Bowl cover interlock prevents running when cover is in improper position.
  • Bowl sensing switch prevents operating without bowl.

  • Manufacturer Information


    Power Information

    115 volts


    192 lbs.
    24 in.
    35 in.
    20 in.

    Shipping Information

    Your order will be shipped from
    Salem, NH 03079

    Customer Pick Up

    (Not Available for pickup)