Vollrath 366720*D Drop-In Dual 12" x 20" Pan Hot & Cold Well - Top Mount
Vollrath 366720*D, 3667201D, 3667202D
Models: Vollrath 366720*D, Vollrath 3667201D, Vollrath 3667202D
This item is shipped brand new directly from the supplier. The image above is for reference only. **Please note: this is a custom item that features a lead time of up to 4 WEEKS and CANNOT BE CANCELED OR RETURNED AFTER ORDERING.
Item: Vollrath Drop-In Dual 12" x 20" Pan Hot & Cold Well
Model: 3667201D, 3667202D
- Top is 18-gauge 300 series stainless steel, with a flat work surface around the opening and die stamped with full perimeter drip edge. A molded breaker gasket is fitted under the drip edge.
- Seamless well is 18-gauge 300 series stainless steel
- Exterior housing is 18-gauge galvanized steel
- Refrigeration coils surround the exterior side walls of each well for maximum cooling
- 625 Watt rope heater is attached to the bottom of each well
- The inner well assembly is insulated with foamed-in-place polyurethane foam insulation
- Hot/Cold operation toggle switch with lighted indicator
- Thermostatic hot control
- Factory set cold control on compressor
- Condensing unit suspended below well
- 3/4" (1.9 cm) integral drain is standard
- Unit comes with 6 ft. (1.5 m)cord and plug and does not require hard wiring
- 4 ft. (1.2 m) flexible control cord
- Positioning clips are provided to center drop-in within the cutout
- For complete air circulation, two openings in the cabinet are required. Each louver cutout is 10" x 20" (25.4 cm x 50.8 cm). Locate openings on the front and rear (short) sides of the cabinet.
- Available in 120 V, 5-15R or 120 V/208-240V 14-20R electrical configuration (choose at checkout).
- One (1) year parts and labor warranty.
|Powered by:||120/208 volts|
|Shipped from |
Sheboygan, WI 53081
|Customer Pick Up|
|Not Available (Shipping Only)|
|This information may change anytime. We are not responsible for it's accuracy.|
There are currently no reviews for this item. Be the first to write one.