Drop-In Three 12" x 20" Pan Hot & Cold Well - Top Mount

This item is shipped brand new directly from the supplier. The image above is for reference only. **Please note: this is a custom item that features a lead time of up to 4 WEEKS and CANNOT BE CANCELED OR RETURNED AFTER ORDERING.

Item: Vollrath Drop-In Three 12" x 20" Pan Hot & Cold Well

Model: 3667301D, 3667302D

Features

• Top is 18-gauge 300 series stainless steel, with a flat work surface around the opening and die stamped with full perimeter drip edge. A molded breaker gasket is fitted under the drip edge.
• Seamless well is 18-gauge 300 series stainless steel
• Exterior housing is 18-gauge galvanized steel
• Refrigeration coils surround the exterior side walls of each well for maximum cooling
• 625 Watt rope heater is attached to the bottom of each well
• The inner well assembly is insulated with foamed-in-place polyurethane foam insulation
• Hot/Cold operation toggle switch with lighted indicator
• Thermostatic hot control
• Factory set cold control on compressor
• Condensing unit suspended below well
• 3/4" (1.9 cm) integral drain is standard
• Unit comes with 6 ft. (1.5 m)cord and plug and does not require hard wiring
• 4 ft. (1.2 m) flexible control cord
• Positioning clips are provided to center drop-in within the cutout
• For complete air circulation, two openings in the cabinet are required. Each louver cutout is 10" x 20" (25.4 cm x 50.8 cm). Locate openings on the front and rear (short) sides of the cabinet.
• Available in 120 V, 5-20R or 120 V/208-240V 14-20R electrical configuration (choose at checkout).

Warranty

• One (1) year parts and labor warranty.