56" Low Boy Refrigerated Stand S/s Delfield F2956C
Model: Delfield F2956C
This item is shipped brand new direct from the manufacturer. Please note the picture above is for reference only.Top is 18-gauge stainless steel, with integral front marine edge.
Standard stainless steel ends.
High density polyurethane foam insulation throughout unit. Refrigerated/freezer base fronts are made of .095" thick ABS plastic backed by rigid polyurethane water blown injection molded frames (NO WOOD). Exterior drawer fronts are stainless steel with an ABS plastic liner. Snap-in dart style vinyl magnetic gasket.
Drawer handles are recessed black plastic held in with a positive lock system.
14-gauge leg rails run the entire length of the unit.
Self-contained come standard on 300 pound casters
8' cord and plug supplied.
Base interior cabinet is cooled with mullion style coated blower coil(s) mounted between each door/drawer section for even air and temperature control. Blower coil enclose refrigeration lines, evaporator coil, expansion valve and fans.
Interior refrigerated base cabinet section to maintain 36° to 40° meeting NSF requirements. Digital thermometer. Electric condensate evaporators are standard on self-contained freezers
Drawer system is sized to hold 12" x 20" x 4" deep hotel pans (by others). The drawer system is all stainless steel construction for maximum durability.
Height of surface for setting equipment is 25.50".
Environmentally friendly HFC-404A refrigerant.
Delfield 56.25" Low-Profile Refrigerated Base Equipment Stand - Self Contained F2956C
Delfield's comprehensive line of refrigerated low profile equipment stands, arguably the industry's largest offering. Designed by the standard lengths of cook top equipment - not drawer sizes - the new low profile equipment stands make what used to be considered "custom equipment" standard. This item has the following features and specifications:
One year parts and 90 day labor standard warranty. Backed by the Enodis STAR Service Network, helping to extend the life of your equipment and reduce ownership costs with expert service and genuine factory parts.
Exterior top is 18-gauge stainless steel with standard marine edges on
all four sides. Corners are fully welded with smooth radii corners for easy
clean out. Interior subtop is 22-gauge stainless steel. Over two inches of
Polyurethane two-part foam provides insulation and rigidity.
Refrigerated base has 22 gauge stainless steel interior back and bottom
with ABS thermoformed sides. Base exterior back, bottom and sides are
constructed of galvanized steel.
Finished stainless steel ends are standard. Louver, coil panel and drawer
faces are all standard with stainless steel construction. (Unit is supplied
with a wall-mounted bracket and threaded rod to allow installation of the
unit against a solid surface.)
Units foundation is made of 14 gauge 1.50" x 3.25" thick galvanized leg
rails with casters as standard. Unit comes standard with a stainless steel
leg rail cover-up skin.
The Full Extension Plus drawer system is independently self-sufficient
without relying on the cabinet for strength. The entire drawer assembly
is constructed of stainless steel. Drawer tracks are 11 gauge and track
supports and cross members are 12 gauge. Rollers are made of selflubricating
Delrin material and do not require any grease. Intermediate
tracks are removable without tools. Drawer boxes are designed to allow
easy grip of pan flanges. Stay shut feature allows drawers to remain closed
on uneven floors. Drawers will accommodate 4.00" deep pans only. Slots
are provided for optional adaptor bars to accommodate fractional and full
Mullion Coil Refrigeration system uses HFC-404A refrigerant, and maintains
36°F (2°C) to 40°F (4°C) interior cabinet temperature at 100°F (38°C)
ambient room temperature. Both remote and self-contained models are
standard with exterior digital thermometer and electric condensate evaporators.
Electrical connections shall be 115 volt, 60 hertz and single phase.
Self-contained models have a pre-wired condensing unit with hot gas
condensate evaporator, a thermometer installed in the removable louver,
and is supplied with an 8.0' (2.4 cm) cord and plug.
|Powered by:||115 volts|
|Shipped from |
Mount Pleasant, MI 48804
|Customer Pick Up|
|Not Available (Shipping Only)|
There are currently no reviews for this item. Be the first to write one.