Berkel X13A-PLUS 13" 1/2 HP Professional Series Auto Slicer - G/P Interlock
Berkel Model: X13A-PLUS SKU 145829
Free Shipping
Sale Price
$7,303.45/ each
In Stock
Pickup Not Available
| Similar Models Available: |
|---|
 New X13-PLUS |
Free Shippingon Vulcan / Berkel / Wolf products |
|
|
Only for customers within the 48 contiguous states.. | |
Berkel X13A-PLUS Specifications
Low Price Guarantee On All Berkel Products!
Item: 13" 1/2 HP Automatic Gravity Feed Professional Series Slicer w/ Gauge Plate Interlock
Model:X13A-Plus
Features
Attention CA Residents
Model:X13A-Plus
Features
- 1-speed, 1/2 HP, permanently lubricated ball bearing knife motor with thermal protection.
- Automatic operation in three speeds: 20, 40 or 60 slices/minute.
- Three stroke lengths: 1/3, 2/3 and full stroke.
- Furnished in 120/60/1, 7 amps, AC, with 3 wire cord and plug.
- LED indicates power to the slicer.
- One-piece NSF approved polymer base and product table for reduced seams, accessibility and easy cleaning.
- Index knob conveniently located outside the drip zone in the upper left to provide quick and easy access.
- Variable pitch barrel cam for ultra fine, precise slice adjustment to a thickness of 15/16" (34 mm).
- 13" (330 mm) diameter, hollow ground, hardened and polished forged stainless steel knife
- Large product table with extra capacity: Rectangles up to 10-1/2" x 6-3/4" (265 mm x 170 mm), Squares up to 7-1/2" (190 mm), Rounds up to 8-1/2" (220 mm) diameter.
- Articulating and full length rear mounted meat pusher to secure and advance products evenly, fence to hold product during automatic operation.
- Ergonomic, multi-grip handle to advance product table.
- Submersible, removable product table mounted sharpener for consistent sharpening and easy cleaning.
- Borazon sharpening stones for fast, accurate sharpening and extended life.
- No-volt release requires restarting the slicer after a power interruption.
- Permanent ring guard protects entire non-slicing portion of the knife.
- Sealed start/stop switches conveniently located on the index knob housing out of the food zone.
- Mechanical interlock for reliably securing the gauge plate during cleaning (gauge plate interlock).
- An easy to use kick stand for easy cleaning under the slicer.
- One year limited parts and labor warranty.
Manufacturer Information | |
| Brand | Berkel |
|---|---|
| Model | X13A-PLUS |
Power Information | |
| Power | 120 volts |
| Phases | 1 |
| Watts | 840 |
Item Dimensions | |
| Weight | 141.00 lbs. |
| Width | 28.00 in. |
| Depth | 30.00 in. |
| Height | 26.00 in. |
Documents
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.
ETL Sanitation Listed
ETL Sanitation mark demonstrates compliance with applicable national sanitation requirements (NSF) and indicates that equipment is fit for use in the production of food intended for human consumption, or the equipment is fit for use in an environment where food intended for human consumption is produced.
Made in the USA
This product was manufactured in the United States of America.
