Breidert TXB20 1 HP Upblast Range Hood Exhaust Upblast Fan - 4200cfm
Breidert Model: TXB20 1 HP SKU: 44020
In Stock
Pickup Not Available
| Similar Models Available: |
|---|
 New TXB20 1 1/2HP |
 New TXB24 1 1/2HP |
New TXB24 2HP |
New TXB18 1 HP |
 New TXB15 1HP |
Breidert TXB20 1 HP Specifications
Low Price Guarantee On All Breidert Products!
This item comes brand new direct from the manufacturer. TXB units have Neoprene vibration isolators, maximum heat operation of 300°F.
This Exhaust Fan has the following features and specifications:
Complies with U.L. 762
Weatherproof disconnect is included.
Curbs are 20" high 18 gauge galvanized, vent, flat roof, self flashing style - not included but available as an add-on (right)
Aluminum housing
Stainless steel exterior faster
Aluminum backward inclined wheel
Prepunched aluminum curb cap with welded corners
Single piece aluminum birdscreen and windband
Conduit wiring chase
This Exhaust Fan has the following features and specifications:
This fan is rated to pull from 3700 cfm to 4200 cfm @ 5/8" static pressure if one side of the hood is against a wall.
If you have additional questions, please contact our Hood Specialists on (888) 949-9613 ext 451.
Attention CA Residents
If you have additional questions, please contact our Hood Specialists on (888) 949-9613 ext 451.
Manufacturer Information | |
| Brand | Breidert |
|---|---|
| Model | TXB20 1 HP |
Power Information | |
| Power | 115/230 volts |
| Phases | 1 |
Item Dimensions | |
| Weight | 215.00 lbs. |
| Width | 38.00 in. |
| Depth | 38.00 in. |
| Height | 34.00 in. |
UL Listed
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
ETL Listed
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.
Made in the USA
This product was manufactured in the United States of America.
