Our Make-Up Air is an innovative design (Unlike most of our competitors systems; all grease-laden vapors and smoke get trapped in the airflow creating a safe, clean, and comfortable environment. This saves you money on your heating and cooling bills!)
The BSSM48-ETL-6 ETL Listed Hood
For use in medium to heavy cooking environments. The grease cup and aluminum filters are included and other accessories are available:
6 ft wide, 4 ft deep & 2 ft tall
Supplied with 1 Pre-Installed Light (final connection must be performed by a Licensed Electrician)
Includes pre-installed 3" standoff on the back of the Hood. (Including standoff, hood will measure 51" from wall).
WILL PASS ANY CODE, ANYWHERE!
Make Up Air Fan: DMUA18FA, Curb Included
Tip Speed: 5180
Volume: 2900 CFM
Motor HP: 1/6
Static Pressure: Rated for 2220 CFM at .125in Static Pressure
Fan Base: 26"
Exhaust Fan: DU50 1/2HP, Curb Included
Volume: 1925 cfm
TS: 5932 ft/min
Static Pressure: 0.5" w.g.
Fan Base: 21"
Consult our Hood Buyer’s Guide for information on purchasing the correct size vent hood with exhaust fans for your kitchen, or contact our Hood Specialists at 404-752-6715 for advice.
This is NOT the entire Hood System you need. This is only for the major components as they apply to NFPA 96 Codes. To the right we have listed specific accessories for this model. Please check with your local code department for specific items that you will need.
Please Note: If any optional accessories are installed (i.e. Fire Suppression Systems, Lights, Standoffs, Collars) this will no longer be considered "Quick Ship" and standard lead times will apply
Please Note: local ordinances may require additional accessories to meet fire and safety codes. Check with local code departments before purchasing. Please call us directly (404-752-6715) with more questions about necessary accessories.
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
This product is UL listed by the UL certification agency which means it meets safety and structural integrity standards for use in food service operations.
This product has been certified by the National Fire Protection Association (NFPA) as meeting standards for fire safety including electrical integrity, heat resistance, fire and explosion hazards, seal integrity and more.
This product is ETL listed and has been been found to meet minimum requirements for product safety, is produced in a facility that meets compliance measures, and is subject to period inspection.
Made in the USA
This product was manufactured in the United States of America.