Superior Hoods CSS30-09 9ft x 2.5ft Stainless Concession Grease Hood - 4in Front
Superior Hoods Model: CSS30-09 SKU: 75177Select
Earn More With PeachPoints
|
| Calculate Estimated Cost | |
|
Only for customers within the 48 contiguous states..
| |
Superior Hoods CSS30-09 Specifications
Please note that these are manufactured to order. They are usually manufactured and shipped out within 10 Business days. Delivery times vary depending on your location. Thank you for your understanding and patience.
This is NOT the entire Hood System that you would need. This is only for the major components as they apply to NFPA 96 Codes. Please check with your local code department for specific items that you will need.
This hood is 9ft wide, 2 1/2ft deep, and slopes from 2ft tall at the back to 4in at the Front. Best for most wall mount commercial hood applications. For use in medium to heavy cooking environments. The grease cup and aluminum filters are included and other accessories are available (please see Recommended Accessories just below).
Per the Manufacturer, this hood would require 3200 to 3400 CFM if at least one side is against a wall.
They are Superior to others in that they are made of 100% Stainless Steel, not just what is seen. Unlike those that are made of Stainless Steel ("where exposed") and Galvanized Metal, these will stand the test of time and regular cleaning.
They feature the shallow front design (6 inches!) so that they can be used where low ceilings are present, especially in Concession Trailers or Trucks (and the taller cooks and chefs will not have to worry about banging their heads) but the hood still drops down closer to the cooking surfaces in the back. This allows even more of the fumes and grease-ladened vapors to be pulled out of the building.
The filters in the hood are standard 20-inch high as opposed to 16-inch high. This provides more filtering surface and therefore is more efficient and quieter to operate.
Manufacturer Information | |
| Brand | Superior Hoods |
|---|---|
| Model | CSS30-09 |
Item Dimensions | |
| Weight | 400.00 lbs. |
| Width | 108.00 in. |
| Depth | 36.00 in. |
| Height | 24.00 in. |
Packing Info | |
| Packing Fee | $200.00 |
Documents
NSF Listed
This product meets National Sanitation Foundation (NSF) standards for public safety & environmental factors with regards to design, manufacture, operation, and labeling.
NFPA Certified
This product has been certified by the National Fire Protection Association (NFPA) as meeting standards for fire safety including electrical integrity, heat resistance, fire and explosion hazards, seal integrity and more.
Made in the USA
This product was manufactured in the United States of America.










