Drop-In Single 12" x 20" Pan Hot & Cold Well

• Top is 18-gauge 300 series stainless steel, with a flat work surface around the opening and die stamped with full perimeter drip edge. A molded breaker gasket is fitted under the drip edge.
• Seamless well is 18-gauge 300 series stainless steel
• Exterior housing is 18-gauge galvanized steel
• Refrigeration coils surround the exterior side walls of the well for maximum cooling
• 625 Watt rope heater is attached to the bottom of well
• The inner well assembly is insulated with foamed-in-place polyurethane foam insulation
• Hot/Cold operation toggle switch with lighted indicator
• Thermostatic hot control
• Factory set cold control on compressor
• Condensing unit suspended below well
• 3/4" (1.9 cm) integral drain is standard
• Unit comes with cord and plug and does not require hard wiring
• Positioning clips are provided to center drop-in within the cutout
• For complete air circulation, two openings in the cabinet are required. Louver cutout is 8" x 10" (20.3 cm x 25.4 cm).
• Available in both top-mount and bottom-mount configurations (choose at checkout).
• Available in 120 V, 5-15P or 120 V/208-240V 14-20P electrical configuration (choose at checkout).
  
  Dimensions:
  
• Top Mount (overall measurements) - 18-1/16" wide x 26" deep x 23-7/8" high
• Bottom Mount (overall measurements) - 16-7/8" wide x 25-1/8" deep x 24-1/16" high

Warranty

• One (1) year parts and labor warranty.